If you’re planning on buying a case to your iPad, it is very important know the proper measurement. The identical goes in case you simply need to know the mannequin of your iPad. There are a number of other ways to measure the dimensions of your iPad, relying on whether or not you might have the system available or not. On this article, we’ll offer you step-by-step directions on how you can measure the dimensions of your iPad, whatever the mannequin.
You probably have your iPad available, the simplest approach to measure the dimensions is to make use of a ruler or measuring tape. Measure the size and width of the iPad, from edge to edge. The size is the measurement from the highest to the underside of the iPad, whereas the width is the measurement backward and forward. After getting the size and width, you should use the next desk to find out the dimensions of your iPad:
| Size (in) | Width (in) | Measurement |
|---|---|---|
| 9.7 | 7.0 | 9.7-inch iPad |
| 10.2 | 7.5 | 10.2-inch iPad (seventh and eighth technology) |
| 10.5 | 7.9 | 10.5-inch iPad Professional |
| 11.0 | 8.1 | 11-inch iPad Professional (1st, 2nd, and third technology) |
| 12.9 | 8.7 | 12.9-inch iPad Professional (1st, 2nd, third, 4th, and fifth technology) |
Measuring the Bodily Dimensions
Earlier than discussing the technical dimensions of an iPad, it is important to know the bodily measurements. These dimensions straight influence the system’s portability, consolation of use, and compatibility with equipment. Here is an in depth information on measuring the bodily dimensions of an iPad.
1. Size and Width
To measure the size and width of the iPad, you may want a ruler or measuring tape. Place the ruler alongside the system’s longest aspect, from one edge to the opposite. Report the measurement in inches or centimeters. Repeat the method for the width, which is the shorter aspect perpendicular to the size. The size usually corresponds to the peak of the iPad when held in portrait mode, whereas the width corresponds to the width in portrait mode or the peak in panorama mode.
2. Top
The peak of an iPad is measured by inserting the system on a flat floor with the display screen dealing with up. Use a ruler or measuring tape to measure from the underside edge to the highest fringe of the system. This measurement is often taken when the iPad is in portrait mode. The peak is essential for figuring out the system’s total measurement and for making certain compatibility with instances and docks.
3. Thickness
To measure the thickness, place the iPad on its aspect and use a ruler or caliper to measure from the highest edge to the underside edge. This measurement is mostly taken on the thickest level of the system, which can range relying on the mannequin and design. The thickness can influence the system’s portability and luxury of holding it for prolonged durations.
Calculating the Display screen Measurement Diagonally
The commonest technique for measuring the dimensions of an iPad is to calculate the display screen measurement diagonally. That is accomplished by measuring the gap from one nook of the display screen to the alternative nook. The result’s the diagonal size of the display screen, which is often expressed in inches.
To calculate the display screen measurement diagonally, you will have a ruler or measuring tape. Place the ruler or measuring tape alongside the diagonal of the display screen, from one nook to the alternative nook. Make it possible for the ruler or measuring tape is straight and that it’s not touching the bezel of the display screen.
After getting measured the diagonal size of the display screen, you should use the next desk to find out the dimensions of your iPad:
| Diagonal Size (inches) | iPad Mannequin |
|---|---|
| 7.9 | iPad mini |
| 9.7 | iPad (2018) |
| 10.2 | iPad (2021) |
| 10.5 | iPad Air (2019) |
| 11 | iPad Professional (2018) |
| 12.9 | iPad Professional (2018) |
Figuring out the Facet Ratio
To find out the facet ratio of an iPad, you could measure the display screen’s width and peak. The facet ratio is often expressed as a ratio of the width to peak, comparable to 4:3 or 16:9. Listed below are detailed steps on how you can measure the iPad’s display screen dimensions:
-
Measure the Width
Use a ruler or measuring tape to measure the horizontal distance throughout the iPad display screen from the left edge to the correct edge. Report this measurement in millimeters (mm) or inches (in).
-
Measure the Top
Subsequent, measure the vertical distance from the highest fringe of the iPad display screen to the underside edge. Report this measurement in mm or in.
-
Calculate the Facet Ratio
Divide the width measurement by the peak measurement to acquire the facet ratio. For instance, if the width is 240 mm and the peak is 160 mm, then the facet ratio can be 240/160 = 3:2.
The next desk summarizes the facet ratios of various iPad fashions:
iPad Mannequin Facet Ratio iPad (1st technology) 4:3 iPad 2 4:3 iPad 3 4:3 iPad 4 4:3 iPad Air 4:3 iPad Air 2 4:3 iPad Professional (9.7-inch) 4:3 iPad Professional (10.5-inch) 4:3 iPad Professional (11-inch) 4:3 iPad Professional (12.9-inch) 4:3
Using On-line Instruments for Accuracy
There are quite a few on-line instruments that may present fast and correct measurements to your iPad. These instruments usually require you to enter the mannequin or dimensions of your system. Listed below are a number of standard choices:
| Device | Options |
|---|---|
| Apple Assist | Official measurements offered by Apple |
| Speccy | Detailed {hardware} info, together with system dimensions |
| iFixit Restore Guides | Detailed measurements and directions for system repairs |
To make use of these instruments, merely go to the web site and enter the mannequin or dimensions of your iPad. The device will then offer you the corresponding measurements.
Utilizing a Bodily Ruler or Measuring Tape
For those who choose a extra hands-on strategy, you should use a bodily ruler or measuring tape to measure your iPad. To do that, place the ruler or tape alongside the sting of the system and skim the measurement. Make sure that you measure from the sting of the display screen to the sting of the system, together with any bezels or frames.
Contemplating the Facet Ratio
When measuring the dimensions of your iPad, it is also essential to contemplate the facet ratio. This refers back to the ratio of the width to the peak of the display screen. For instance, an iPad with a 4:3 facet ratio could have a special display screen measurement than an iPad with a 16:9 facet ratio, even when they’ve the identical diagonal measurement.
Further Suggestions for Correct Measurement
* Use a high-quality ruler or measuring tape for exact measurements.
* Measure from the middle of the display screen to keep away from any distortion.
* If potential, use a device that gives measurements in each inches and centimeters.
* Evaluate your measurements with the official Apple specs to make sure accuracy.
Assessing the Decision
The decision of an iPad, measured in pixels, refers back to the variety of particular person pixels displayed on its display screen. Larger resolutions end in sharper and extra detailed pictures. To measure the decision of an iPad, observe these steps:
- Navigate to the “Settings” app in your iPad.
- Faucet on “Show & Brightness”.
- Scroll all the way down to the “Decision” part.
- The present decision of your iPad can be displayed right here.
- Faucet on “Extra Resolutions” to see a listing of other resolutions obtainable to your system.
- Measure the peak from the highest of the show to the underside.
- Measure the width from the left fringe of the show to the correct edge.
- Measure the thickness at its thickest level, often alongside the aspect the place the buttons are situated.
- Millimeters to inches: To transform millimeters to inches, multiply the variety of millimeters by 0.0393701.
- Centimeters to inches: To transform centimeters to inches, multiply the variety of centimeters by 0.393701.
- Toes to inches: To transform toes to inches, multiply the variety of toes by 12.
- Obtain and set up the applying from the App Retailer.
- Open the applying and observe the directions on the display screen.
- Level the system’s digicam at your iPad.
- Measure the size, width, and peak of your iPad utilizing the app’s instruments.
The obtainable resolutions for every iPad mannequin range relying on its display screen measurement and {hardware} capabilities. Some widespread resolutions for iPads embrace:
| iPad Mannequin | Decision |
|---|---|
| iPad (ninth technology) | 10.2 inches, 2160 x 1620 pixels |
| iPad Air (fifth technology) | 10.9 inches, 2360 x 1640 pixels |
| iPad Professional 12.9-inch (sixth technology) | 12.9 inches, 2732 x 2048 pixels |
Checking the General Dimensions
To precisely measure the general dimensions of your iPad, seek advice from the official specs offered by Apple or seek advice from the person handbook that got here together with your system. The size range relying on the precise iPad mannequin and technology.
Here is a desk offering the general dimensions for the most recent generations of iPad fashions:
| Mannequin | Top | Width | Thickness |
|---|---|---|---|
| iPad Professional 12.9-inch (fifth technology) | 11.04 inches (280.6 mm) | 8.46 inches (214.9 mm) | 0.25 inches (6.36 mm) |
| iPad Professional 11-inch (third technology) | 9.74 inches (247.6 mm) | 7.02 inches (178.5 mm) | 0.23 inches (5.9 mm) |
| iPad Air (fifth technology) | 9.76 inches (247.6 mm) | 7.03 inches (178.5 mm) | 0.24 inches (6.1 mm) |
| iPad mini (sixth technology) | 7.69 inches (195.4 mm) | 5.30 inches (134.8 mm) | 0.28 inches (7.2 mm) |
When measuring the scale, maintain the next in thoughts:
Understanding Show Phrases
Show measurement: Measured diagonally from nook to nook, excluding any rounded edges or bezels (ie. the body across the display screen). Show measurement is often expressed in inches.
Facet ratio: The ratio of the show’s width to its peak. Widespread facet ratios embrace 4:3 (sq.), 16:9 (widescreen), and 16:10 (wider than widescreen).
Decision: The variety of pixels displayed on the display screen. Decision is often expressed when it comes to the variety of pixels within the horizontal route by the variety of pixels within the vertical route (e.g., 1920×1080).
Pixel density: The variety of pixels per inch (PPI) of the show. Pixel density impacts the readability and sharpness of the picture, with larger pixel densities leading to sharper pictures.
Colour depth: The variety of bits used to characterize every pixel’s shade. Colour depth impacts the vary and accuracy of colours that may be displayed, with larger shade depths leading to extra vibrant and correct colours.
Show kind: The kind of expertise used to show the picture, comparable to LCD (liquid crystal show), OLED (natural light-emitting diode), or IPS (in-plane switching). Totally different show sorts supply totally different benefits and downsides when it comes to picture high quality, shade accuracy, and viewing angles.
Retina show: A high-resolution show with a pixel density that’s excessive sufficient that the person pixels aren’t seen to the human eye at a typical viewing distance. Retina shows present sharp and clear pictures which are straightforward on the eyes.
| Show Measurement (inches) | Facet Ratio | Decision | Pixel Density (PPI) |
|---|---|---|---|
| 9.7 | 4:3 | 1024 x 768 | 264 |
| 10.2 | 4:3 | 1024 x 768 | 326 |
| 10.5 | 4:3 | 1668 x 2224 | 265 |
| 10.9 | 4:3 | 1668 x 2388 | 264 |
| 12.9 | 4:3 | 2048 x 2732 | 265 |
| 11 | 16:10 | 2388 x 1668 | 265 |
| 12.4 | 16:10 | 2560 x 1600 | 265 |
Changing Models of Measurement
For those who’re extra comfy measuring with totally different items than inches or centimeters, you may simply convert your iPad’s dimensions utilizing the next desk:
| Unit | Conversion Issue to Inches |
|---|---|
| Millimeters (mm) | 0.0393701 |
| Centimeters (cm) | 0.393701 |
| Toes (ft) | 12 |
For instance, to transform the iPad Professional 12.9-inch mannequin’s peak of 11.04 inches to millimeters, you’d multiply 11.04 by 25.4 (the variety of millimeters in an inch), which provides you 280.44 millimeters.
Here is an in depth rationalization of the conversions:
By following these directions, you may simply measure the dimensions of your iPad in any unit of measurement you like.
Utilizing Third-Celebration Purposes
A number of third-party functions can be found that may assist you measure the dimensions of your iPad. One standard choice is the Measure app, which is obtainable at no cost on the App Retailer. This app lets you measure the size, width, and peak of your iPad utilizing the system’s digicam. Another choice is the Ruler app, which can also be obtainable at no cost on the App Retailer. This app supplies quite a lot of measuring instruments, together with a ruler, a protractor, and a tape measure. To make use of a third-party utility to measure the dimensions of your iPad:
The next desk summarizes the important thing options of the 2 hottest third-party functions for measuring the dimensions of an iPad:
| Function | Measure | Ruler |
|---|---|---|
| Worth | Free | Free |
| Instruments | Ruler, protractor, tape measure | Ruler, protractor, tape measure |
| Digital camera | Sure | Sure |
| Accuracy | Excessive | Excessive |
Evaluating to Different Gadget Sizes
When evaluating the dimensions of an iPad to different units, it is useful to contemplate the scale of widespread sizes. Here is a desk exhibiting the scale of assorted iPad sizes and their comparability to different units:
| Gadget | Show Measurement (inches) | Dimensions (inches) |
|---|---|---|
| iPad mini (sixth technology) | 8.3 | 7.9 x 5.3 x 0.24 |
| iPad (ninth technology) | 10.2 | 9.8 x 6.8 x 0.29 |
| iPad Air (fifth technology) | 10.9 | 9.7 x 7 x 0.24 |
| iPad Professional 11-inch (4th technology) | 11.0 | 9.7 x 7 x 0.23 |
| iPad Professional 12.9-inch (sixth technology) | 12.9 | 11 x 8.5 x 0.25 |
| iPhone 14 Professional | 6.1 | 5.8 x 2.8 x 0.31 |
| Samsung Galaxy S23+ | 6.6 | 6.2 x 3 x 0.31 |
| MacBook Air (M2) | 13.6 | 11.97 x 8.36 x 0.44 |
| MacBook Professional 14-inch (M2) | 14.2 | 12.31 x 8.91 x 0.61 |
As you may see, iPads are available in a variety of sizes, from the compact iPad mini to the bigger iPad Professional. When choosing the proper measurement to your wants, contemplate what actions you may be utilizing the system for. For those who’re primarily utilizing it for studying, shopping the online, or watching movies, a smaller iPad could also be enough. Nevertheless, in case you’re planning on utilizing it for extra intensive duties like gaming or video modifying, a bigger iPad with a better decision show could also be a more sensible choice.
Measure Measurement of iPad
To measure the dimensions of an iPad, you could decide the diagonal display screen measurement. This measurement is often given in inches and represents the gap from one nook of the display screen to the alternative nook diagonally.
To measure the diagonal display screen measurement, you should use a ruler or tape measure. Place the ruler or tape measure alongside the diagonal of the display screen, making certain that it runs from one nook to the alternative nook. The measurement you acquire would be the diagonal display screen measurement of the iPad.
For instance, in case you measure the diagonal display screen measurement of an iPad and acquire a measurement of 9.7 inches, then the iPad has a 9.7-inch display screen.
Folks Additionally Ask
measure iPad peak and width?
To measure the peak and width of an iPad, you should use the next steps:
1. Place the iPad on a flat floor.
2. Use a ruler or measuring tape to measure the gap from the highest fringe of the iPad to the underside edge. This gives you the peak of the iPad.
3. Subsequent, measure the gap from the left fringe of the iPad to the correct edge. This gives you the width of the iPad.
